1 power transistors 2sd2052 silicon npn triple diffusion planar type for high power amplification complementary to 2sb1361 n features l satisfactory foward current transfer ratio h fe vs. collector cur- rent i c characteristics l wide area of safe operation (aso) l high transition frequency f t l optimum for the output stage of a hifi audio amplifier l full-pack package which can be installed to the heat sink with one screw n absolute maximum ratings (t c =25?c) parameter collector to base voltage collector to emitter voltage emitter to base voltage peak collector current collector current collector power dissipation junction temperature storage temperature symbol v cbo v ceo v ebo i cp i c p c t j t stg ratings 150 150 5 15 9 100 3 150 C55 to +155 unit v v v a a w ?c ?c n electrical characteristics (t c =25?c) parameter collector cutoff current emitter cutoff current forward current transfer ratio base to emitter voltage collector to emitter saturation voltage transition frequency collector output capacitance symbol i cbo i ebo h fe1 h fe2 * h fe3 v be v ce(sat) f t c ob conditions v cb = 150v, i e = 0 v eb = 3v, i c = 0 v ce = 5v, i c = 20ma v ce = 5v, i c = 1a v ce = 5v, i c = 7a v ce = 5v, i c = 7a i c = 7a, i b = 0.7a v ce = 5v, i c = 0.5a, f = 1mhz v cb = 10v, i e = 0, f = 1mhz min 20 60 20 typ 20 150 max 50 50 200 1.8 2.0 unit m a m a v v mhz pf * h fe2 rank classification rank q s p h fe2 60 to 120 80 to 160 100 to 200 t c =25 c ta=25 c unit: mm 1:base 2:collector 3:emitter topC3 full pack package(a) 15.0 0.3 21.0 0.5 16.2 0.5 12.5 solder dip 3.5 0.7 15.0 0.2 5.0 0.2 11.0 0.2 10.9 0.5 5.45 0.3 3 2 1 1.1 0.1 2.0 0.2 0.6 0.2 2.0 0.1 f 3.2 0.1 3.2
2 power transistors 2sd2052 p c ta i c v ce i c v be v ce(sat) i c h fe i c f t i c c ob v cb area of safe operation (aso) 0 160 40 120 80 140 20 100 60 0 120 100 80 60 40 20 (1) t c =ta (2) with a 100 100 2mm al heat sink (3) without heat sink (p c =3w) (1) (2) (3) ambient temperature ta ( ?c ) collector power dissipation p c ( w ) 012 10 8 26 4 0 20 16 12 8 4 t c =25?c i b =1000ma 700ma 600ma 500ma 800ma 900ma 400ma 300ma 200ma 100ma 50ma collector to emitter voltage v ce ( v ) collector current i c ( a ) 02.4 2.0 1.6 0.4 1.2 0.8 0 20 16 12 8 4 t c =?5?c 25?c 100?c v ce =5v base to emitter voltage v be ( v ) collector current i c ( a ) 0.1 1 10 100 0.3 3 30 0.001 0.003 0.01 0.03 0.1 0.3 1 3 10 i c /i b =10 t c =100?c ?5?c 25?c collector current i c ( a ) collector to emitter saturation voltage v ce(sat) ( v ) 0.1 1 10 100 0.3 3 30 1 3 10 30 100 300 1000 3000 10000 v ce =5v t c =100?c 25?c ?5?c collector current i c ( a ) forward current transfer ratio h fe 0.01 0.1 1 10 0.03 0.3 3 0.1 0.3 1 3 10 30 100 300 1000 v ce =5v f=1mhz t c =25?c collector current i c ( a ) transition frequency f t ( mhz ) 1 3 10 30 100 10 10000 1000 100 30 300 3000 i e =0 f=1mhz t c =25?c collector to base voltage v cb ( v ) collector output capacitance c ob ( pf ) 1 10 100 1000 3 30 300 0.01 0.03 0.1 0.3 1 3 10 30 100 i cp i c t=10ms 100ms dc non repetitive pulse t c =25?c collector to emitter voltage v ce ( v ) collector current i c ( a )
3 power transistors 2sd2052 r th(t) t 10 ? 10 10 ? 10 ? 10 ? 110 3 10 2 10 4 0.1 1 10 100 10000 1000 note: r th was measured at ta=25?c and under natural convection. (1) p t =10v 0.3a (3w) and without heat sink (2) p t =10v 1.0a (10w) and with a 100 100 2mm al heat sink (1) (2) time t ( s ) thermal resistance r th (t) ( ?c/w )
please read the following notes before using the datasheets a. these materials are intended as a reference to assist customers with the selection of panasonic semiconductor products best suited to their applications. due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. b. panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. therefore, panasonic will not assume any liability for any damages arising from any errors etc. that may ap- pear in this material. c. these materials are solely intended for a customer's individual use. therefore, without the prior written approval of panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the internet or in any other way, is prohibited. request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese govern- ment if any of the products or technologies described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative character- istics and applied circuit examples of the products. it does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) the products described in this material are intended to be used for standard applications or gen- eral electronic equipment (such as office equipment, communications equipment, measuring in- struments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. at the final stage of your design, purchas- ing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the guaranteed values, in particular those of maxi- mum rating, the range of operating power supply voltage and heat radiation characteristics. other- wise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) when using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) no part of this material may be reprinted or reproduced by any means without written permission from our company. 2001 mar
|
